Описание

Sensor Head: Ultra Long Distance, Wide beam
Model LK-G507
Reference distance Diffused reflection: 500 mm, Specular reflection: 497.5 mm
Measuring range Diffused reflection: -250 to +500 mm, Specular reflection: -249 to +498 mm*1*2
Light source Type Red semiconductor laser
Wavelength 650 nm (visible light)
Laser Class Class II (FDA CDRH 21CFR Part 1040.10), Class 2 (IEC60825-1)
Output 0.95 mW
Spot diameter (at reference distance) Approx. 300 x 9,500 µm
Linearity ±0.05 % of F.S. (±250 µm)*3 -250 to +250 mm high-accuracy range: ±0.02 % of F.S. (±100 µm) -250 to -50 mm long range: ±0.1 % of F.S. (±500 µm) -250 to +500 mm (F.S. = ±250 mm)*4
Repeatability 2 µm*5
Sampling frequency 20 / 50 / 100 / 200 / 500 / 1000 µs (Selectable from 6 levels)
LED display Near the centre of the measurement: Green lights Within the measurement area: Orange lights Outside the measurement area: Orange flashing
Temperature characteristics 0.01 % of F.S./°C (F.S.= ±250 mm)
Environmental resistance Enclosure rating IP67 (IEC60529)
Ambient light Incandescent lamp or Fluorescent lamp: 5,000 lux max.
Ambient temperature 0 to +50 °C
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material Aluminium die-cast
Weight Approx. 380 g (including the cable)
*1 The range is obtained by measuring KEYENCE's standard target (ceramic). *2 When the sampling rate is 20 µs, the range becomes -230 (NEAR side) to -250 mm (NEAR side) for diffuse reflection. When the sampling rate is 20 µs, the range becomes -230 (NEAR side) to -249 mm (NEAR side) for specular reflection. When the sampling rate is 50 µs, the range becomes -125 (NEAR side) to -250 mm (NEAR side) for diffuse reflection. When the sampling rate is 50 µs, the range becomes -125 (NEAR side) to -249 mm (NEAR side) for specular reflection. *3 All are calculated at F.S. = ±250 mm. 'High accuracy range' and 'long range' refer to the linearity when those ranges are used. *4 The range is obtained by measuring KEYENCE's standard target (ceramic) with the Standard mode. *5 The range is obtained by measuring KEYENCE's standard (SUS) with 4,096 times of averaging at the reference distance.
''