Описание

Controller, with Monitor Function
Model LS-7601*1
Type High-performance
No. of connectable sensor heads 2 (fully compatible for all head types)
Display Measurement display TFT 5.5-inch LCD display
Minimum display unit 0.01 to 100 µm (7-level selectable)
Display range ±99.99999 to 9,999.9 mm (Linked to minimum display unit setting, mm/µm selectable)
Measurement position monitor Monitor image (When the measuring head with the monitor function is connected.)
Tolerance check output display 5-level LCD indicator
Input terminal block Synchronous 1, 2 input Non-voltage input for OUT1
Auto-zero 1, 2 input
Reset 1, 2 input
Statistics 1, 2 input
Program selection input Non-voltage input x 4 inputs
Output terminal Analogue voltage output ±10 V x 2 outputs
Alarm output NPN open-collector output (N.C.)
Total judgment output NPN open-collector output for OUT1
Comparator ready output
Strobe 1, 2 output
Connector I/O SUB mode Statistical processing output NPN open-collector output x 2 outputs*2
Function output Selectable from focus, area check, and differential, NPN open-collector output x 2 outputs*2
5-level comparator output NPN open-collector output for OUT2*2
Comparator ready output
Strobe output
BCD mode BCD output Measurement data output (Sign + 7 digits), OUT1/OUT2 selectable, NPN open-collector output*2
BCD selection output NPN open-collector output*2
BCD selection input Non-voltage input*2
Statistical processing input Non-voltage input for OUT2
Synchronous input
Reset input
Auto-zero input
Interface RS-232C Measurement data output and control I/O, printer (Baud rate can be selected up to 115,200 bps.)
Video output Conforming to the NTSC system (PIN connector)
Major functions Simultaneous measurement, Area designation, Calculation, Averaging, Calibration, 16-program memory, Measurement modes, Auto-zero, Print-out, Abnormal value elimination, Transparent object measurement, Measurement point display, Group comparison, Unacceptable value history, Trend display, Statistical processing, Mutual interference prevention, Application function, etc.
Rating Power voltage 24 VDC ±10 %*3
Power consumption 1.2 A max.*3
Environmental resistance Enclosure rating IP64 (Panel surface only)
Ambient temperature 0 to +40 °C
Relative humidity 35 to 85 % RH (No condensation)
Weight Approx. 1,010 g
*1 The rating of the NPN open-collector inside the terminal block is: 100 mA max. (40 V max.), residual voltage of 0.5 V max. The rating of the NPN open-collector inside the connector I/O is: 30 mA max. (30 V max.), residual voltage of 0.5 V max. The rating of non-voltage input is: ON voltage of 1 V max., OFF current of 0.6 mA max. *2 Either SUB mode or BCD mode can be selected. *3 AC power supply can be used when the LS-S11 (AC power supply stand) is connected.
''